Standard Easy Slide

The "Standard" ES-100 slides out the length of base with left runner locking and is ideal for installing in wagons like 100, & 200 series, Patrol, Prado, etc..

Easy Slide "Plus” models

The "Plus” Easy Slide was developed for installing it in a ute canopy with angled sides. To provide clearance for the handle the Easyslide must be mounted back on the drawers. So we have made the plus version with extended travel Runners that slide out an extra 120mm and both sides lock out.

Any one of the mounting styles shown below are acceptable as long as you have one bolt in each corner.

1. Original Strap type mounting plate

2. Two hole mounting plate

3. New style single hole mounting plate

We recommend to run the 12 volt lead up through the handle like the picture below.

The Easy Slide tray sits 25mm above your drawers. Once extended, the tray travels down 290mm (25mm +265mm). It ends up 265mm lower than the top of the drawer (or the bottom of the Easy Slide).

For those with short drawers, there are 5 positions on the locking/lowering mechanism, which allows for 5 different lowering levels. With the lowest being 265mm from the top of the drawers, the second lowest is 175mm from the top of the drawers and works equally as well as any other of the five levels, including the lowest.

Lowest level: 290mm drop		2nd Lowest level: 200mm drop